The “Hello world” driver: loading and removing the driver in kernel space

The “Hello world” driver: loading and removing the driver in kernel space

When a module device driver is loaded into the kernel, some preliminary tasks are usually performed like resetting the device, reserving RAM, reserving interrupts, and reserving input/output ports, etc.

These tasks are performed, in kernel space, by two functions which need to be present (and explicitly declared): module_init and module_exit; they correspond to the user space commands insmod and rmmod , which are used when installing or removing a module. To sum up, the user commands insmod and rmmod use the kernel space functions module_init and module_exit.

Let’s see a practical example with the classic program Hello world:

<hello.c> =

#include <linux/init.h>

#include <linux/module.h>

#include <linux/kernel.h>

MODULE_LICENSE("Dual BSD/GPL");

static int hello_init(void) {

  printk("<1> Hello world!\n");

  return 0;

}

static void hello_exit(void) {

  printk("<1> Bye, cruel world\n");

}

module_init(hello_init);

module_exit(hello_exit);

The actual functions hello_init and hello_exit can be given any name desired. However, in order for them to be identified as the corresponding loading and removing functions, they have to be passed as parameters to the functions module_init and module_exit.

The printk function has also been introduced. It is very similar to the well known printf apart from the fact that it only works inside the kernel. The <1> symbol shows the high priority of the message (low number). In this way, besides getting the message in the kernel system log files, you should also receive this message in the system console.

This module can be compiled using the same command as before, after adding its name into the Makefile.

<Makefile2> =

obj-m := nothing.o hello.o

In the rest of the article, I have left the Makefiles as an exercise for the reader. A complete Makefile that will compile all of the modules of this tutorial is shown in Appendix A.

When the module is loaded or removed, the messages that were written in the printk statement will be displayed in the system console. If these messages do not appear in the console, you can view them by issuing the dmesg command or by looking at the system log file with cat /var/log/syslog.

Table 4 shows these two new functions.

Events	User functions	Kernel functions
Load module	insmod	module_init()
Open device
Read device
Write device
Close device
Remove module	rmmod	module_exit()

Table 4. Device driver events and their associated interfacing functions between kernel space and user space.